New England Arbors VA42022 Guide d'installation télécharger pdf

Wood Post Layout & Installation

for In-Ground Application

Measure and mark out the location of the pergola posts using

string line and temporary wood stakes. Diagonal distances must

be the same to ensure a square installation. Adjust string lines

accordingly. The inside corner of the string lines will be the post

location.

Please Note:

Should you decide to moderately modify the dimensions of your

pergola from the standard kit size, a circular saw with a sharp

fine-tooth blade is all that you need to cut, shorten or modify the

vinyl components. The steel stiffeners for the main beams and

rafters can be cut down using either a hacksaw or a motorized

cutting device

designed to cut steel.

www.edenarbors.com

This pergola can also be installed on a pre-existing wood or

concrete surface using our bolt down bracket system with

a 4x4 wood post (sold separate). See page eight for more details.

Post location and placement is the most critical step in the

overall installation process. Please double check for the

possibility of any underground utilities such as sprinkler, gas

or telephone lines.

S T E P O N E

After you have determined where the posts will be located,

excavate 10” diameter x 36” deep post holes.

After holes are dug and cleaned, place the 4x4 wood post into

a hole ensuring it’s level and square to string lines. The final post

height should be no more than 84” out of the ground. If a post

is higher because of obstructed excavation of footings, please

cut down in height accordingly.

Fill the vacant hole with pre-mixed concrete all the way to

within 3” of the top of the hole.

Repeat for all four posts.

Please Note:

Some 4x4 pressure treated posts can be larger than 3 1/2 x 3 1/2

square due to twisting or cracking. We have allowed a tolerance

for this in the internal one way and two way 4x4 wood post guides

(see page 8). However in extreme cases you may need to shave down

the top of the 4x4 wood post slightly to get the vinyl post started

over the wood post. Before installing your wood posts in the ground,

please check to confirm this and correct at this stage if necessary.

S T E P T W O

Install Wood Supporting Posts Directly into the Ground

111 1/2

111

1/2

10”

36”

84” (Maximum)

3”

10 x 10 Flat Top Pergola

Overhead View

157 11/16 from corner of wood post to corner of wood post.

S T E P O N E 1
S T E P T W O 1

Résumé du contenu

Page 1 - S T E P T W O

Wood Post Layout & Installation for In-Ground ApplicationMeasure and mark out the location of the pergola posts using string line and temporary wo

Plus de documents pour Non New England Arbors VA42022

Voir le document New England Arbors VA42022 Manuel d'instructions

New England Arbors VA42022 Manuel d'instructions (19 pages)

Commentaires sur ces manuels

Pas de commentaire

New England Arbors VA42022 Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Non New England Arbors VA42022. New England Arbors VA42022 Installation Guide Manuel d'utilisatio

Résumé du contenu

Plus de documents pour Non New England Arbors VA42022

Commentaires sur ces manuels

Produits connexes et manuels pour Non New England Arbors VA42022