New-england-arbors VA68144 Manuel d'utilisateur télécharger pdf (Page 3)

ST EP T WO

Lay out the horizontal bottom rail and insert the three long

vertical spindles.

Slide one horizontal mid-rail over the ends of the spindles

to complete the bottom panel.

Layout the other horizontal mid-rail and insert the three shorter

spindles in the pattern identified on the illustration.

Slide the horizontal bent top rail over the ends to complete

the top side panel to complete the top panel.

Set out one post and complete the side panel by inserting it int

the post. Start with the bent top rail first.

Layout the second post with holes facing upwards and insert

the completed panel and connected post into.

Fasten the horizontal bent top rail and both horizontal mid

rails to the posts by installing 6 long (3 in./7.6 cm.) screws into

posts as illustrated.

Repeat for other side panel.

The Vienna Arbor

Assemble the Top & Bottom Side Panels

Set out both side panels ensuring that bottom rail profiles

are facing outwards.

Insert the assembled arch into the top of all four posts

until the arch bottoms rest on top of the "stopper" bolts.

You will need a helper.

Pull the post caps down into final position over the posts

and fasten the arch system to the posts by installing 2 short

( 1 1/2 in. / 3.8 cm.) screws per post as illustrated.

Connect Arch System to Side Panels

ST EP TH RE E

NOTE: Some of the horizontal rails have locking tabs located

at both ends. Once inserted and pushed into the routered

holes, they will lock into place.

Bottom

of Arch

Insert

1st

Insert

2nd

Insert

3rd

1 2 3 4

Pas de commentaire

New-england-arbors VA68144 Manuel d'utilisateur Page 3